Resisul U


ELASTIC SEALANT
 

PRODUCT DESCRIPTION
RESISIL U, is a high-quality, elastic one-component joint sealant based on silicones.

CHARACTERISTICS
-very easy to apply
-colourfast, UV-resistant, contains fungicides
-stays elastic after curing
-very good adhesion to many materials
-low modulus

APPLICATION
-all the usual building and construction joints
-all glazing work
-sanitary installations

APPLICATION EXAMPLES
-top sealing at glazing jobs
-window and door joints
-sealing in sanitary rooms and kitchens
-sealing in cold storage rooms and containers
-sealing in conditioning systems

PACKAGING AND COLOURS
Colours: clear-white-grey-alu grey-brown-bronze-beige-black-stone grey
Packaging: cartridges of 310 ml.- sausages of 600 ml.

SHELF LIFE

1 year in unopened packaging in a cool, dry storage place at temperatures between 5-C and 25Q C

NOTE
The directives contained in this documentation are the result of our experiments and of our experience and have been submitted in good faith. Because of the materials and the great number of possible applications which are out of our control, we cannot accept any responsibility for the results obtained. In every case it is recommended to carry out preliminary experiments.

 


 

TECHNICAL DATA
Base: Polysiloxane
Consistency: stable paste
Curing System: Moisture Cure
Skinning time: ca.7minutes
Curing time: 1.5 mm./24 hours (20SC/ 65 % R.H.)
Hardness: 25±5 Shore A
Shrinkage: none
Specific Gravity: 1.03-1.25 gr./cm3
Temperature Resistance: -60g C - +200a C
Elongation at Break: >500 % (DIN 53504)
Elasticity modulus: 0.35 N/mm2 (DIN 53504)
Maximum deformation: 25 %
Maximum tension: 1.5N/mm2 (DIN 53504)

SURFACES
Substrate: all usual surfaces except PVC
State of Surface: clean, dry, free of grease
Preparation: prime porous surfaces with Primer 100
(consult Ciba Primer Table), no primer required for non
porous surfaces.

JOINT SIZE
Minimum Width: 5 mm.
Maximum Width: 30 mm.
Minimum depth: 5 mm.
Recommendation: 2 x depth = width

APPLICATION
Application Method: applicator gun (hand or pneumatic)
Application Temperature: +19 C - +30fiC
Clean with: White Spirit immediately after application
Finish with: Soapy water before skinning
Repair with: Resisil U

TRANSPORT INFORMATION
Road: ADR: Free
Maritime: IMDG: Free
Air: ICAO/IATA-DGR: Free
UN number: None

LABELING
Symbol: None
R-sentences: None
S-sentences: None

SAFETY MEASURES REMARKS
Take the usual hygiene precautions.
Due to the acetic character some metals (copper, lead) may be attacked

STANDARDS/APPROVALS
-Admission number for fungilides in Belgium: 2390/B
-United Kingdom: BS 5889 Type B